OTTO Sealing Gasket (9742779) for Hitachi ZX excavator - fitted into the housing, gland or hub of the component it seals. It keeps oil inside the joint and dirt outside, so pressure is held and the mating surfaces do not wear. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Pilot Control Lever (9724756) for Hitachi ZX excavator - in the position shown for this part on the machine. It carries load, locates the mating component and takes the wear so the assembly around it keeps working. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Solenoid Proportional Valve (9314145) for Hitachi ZX excavator - mounted on the pump, the valve block, or in the harness run to the cab. It switches hydraulic flow electrically or reports machine condition back to the controller. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Solenoid Proportional Valve (9312792) for Hitachi ZX excavator - mounted on the pump, the valve block, or in the harness run to the cab. It switches hydraulic flow electrically or reports machine condition back to the controller. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Hydraulic Actuated Control Valve (9267050) for Hitachi ZX excavator - inside the main control valve block, or on the pilot circuit that shifts the spools. It directs pump flow to the cylinder or motor that the operator commands, and sets the pressure in that circuit. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Hydraulic Pump Swash Plate Support (9260885) for Hitachi ZX330 / 350DLC / 380GLC excavator - bolted to the pump drive on the engine, behind the coupling. It draws oil from the hydraulic tank and delivers it under pressure to the main control valve, which feeds the boom, arm, bucket and travel circuits. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Main Pump Pilot Solenoid Valve (9258048) for Hitachi ZX excavator - bolted to the pump drive on the engine, behind the coupling. It draws oil from the hydraulic tank and delivers it under pressure to the main control valve, which feeds the boom, arm, bucket and travel circuits. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Solenoid Hydraulic Valve (9254306) for Hitachi ZX excavator - mounted on the pump, the valve block, or in the harness run to the cab. It switches hydraulic flow electrically or reports machine condition back to the controller. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Control Valve Sleeve / Bushing (9246436) for Hitachi ZX excavator - inside the main control valve block, or on the pilot circuit that shifts the spools. It directs pump flow to the cylinder or motor that the operator commands, and sets the pressure in that circuit. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Solenoid Hydraulic Valve (9239590) for Hitachi ZX excavator - mounted on the pump, the valve block, or in the harness run to the cab. It switches hydraulic flow electrically or reports machine condition back to the controller. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Travel Foot Pedal Valve Lever (9235551) for Hitachi ZX excavator - in the position shown for this part on the machine. It carries load, locates the mating component and takes the wear so the assembly around it keeps working. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Hydraulic Cylinder Tube (9233096) for Hitachi ZX excavator - on the hydraulic circuit of the machine, in the position shown for this part. It carries, stores or cleans the hydraulic oil that every circuit on the machine depends on. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Sealing Gasket (9742779) for Hitachi ZX excavator - fitted into the housing, gland or hub of the component it seals. It keeps oil inside the joint and dirt outside, so pressure is held and the mating surfaces do not wear. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Pilot Control Lever (9724756) for Hitachi ZX excavator - in the position shown for this part on the machine. It carries load, locates the mating component and takes the wear so the assembly around it keeps working. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Solenoid Proportional Valve (9314145) for Hitachi ZX excavator - mounted on the pump, the valve block, or in the harness run to the cab. It switches hydraulic flow electrically or reports machine condition back to the controller. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Solenoid Proportional Valve (9312792) for Hitachi ZX excavator - mounted on the pump, the valve block, or in the harness run to the cab. It switches hydraulic flow electrically or reports machine condition back to the controller. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Hydraulic Actuated Control Valve (9267050) for Hitachi ZX excavator - inside the main control valve block, or on the pilot circuit that shifts the spools. It directs pump flow to the cylinder or motor that the operator commands, and sets the pressure in that circuit. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Hydraulic Pump Swash Plate Support (9260885) for Hitachi ZX330 / 350DLC / 380GLC excavator - bolted to the pump drive on the engine, behind the coupling. It draws oil from the hydraulic tank and delivers it under pressure to the main control valve, which feeds the boom, arm, bucket and travel circuits. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Main Pump Pilot Solenoid Valve (9258048) for Hitachi ZX excavator - bolted to the pump drive on the engine, behind the coupling. It draws oil from the hydraulic tank and delivers it under pressure to the main control valve, which feeds the boom, arm, bucket and travel circuits. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Solenoid Hydraulic Valve (9254306) for Hitachi ZX excavator - mounted on the pump, the valve block, or in the harness run to the cab. It switches hydraulic flow electrically or reports machine condition back to the controller. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Control Valve Sleeve / Bushing (9246436) for Hitachi ZX excavator - inside the main control valve block, or on the pilot circuit that shifts the spools. It directs pump flow to the cylinder or motor that the operator commands, and sets the pressure in that circuit. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Solenoid Hydraulic Valve (9239590) for Hitachi ZX excavator - mounted on the pump, the valve block, or in the harness run to the cab. It switches hydraulic flow electrically or reports machine condition back to the controller. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Travel Foot Pedal Valve Lever (9235551) for Hitachi ZX excavator - in the position shown for this part on the machine. It carries load, locates the mating component and takes the wear so the assembly around it keeps working. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.
OTTO Hydraulic Cylinder Tube (9233096) for Hitachi ZX excavator - on the hydraulic circuit of the machine, in the position shown for this part. It carries, stores or cleans the hydraulic oil that every circuit on the machine depends on. Supplied as an OTTO replacement, checked before packing, with 3-12 months warranty options. Send us your machine serial and a photo of the old part and we will confirm fitment before dispatch.